Exposed cooling controllers: the vector nobody audits

Controladores de enfriamiento expuestos: el vector que nadie audita

On the night of October 11, 2026, hundreds of supermarket refrigeration chambers in France entered defrost mode and the thermometer reached 50 °C. There was no data theft and no ransom: there was spoiled product and equipment that caught fire. What caused the damage was not a failure in the management system, but a refrigeration supervisory controller reachable over the network, with an open remote maintenance port, and a command nobody had authorized.

What matters for a data center is not the supermarket: it is that the same kind of equipment —the controller that governs a chiller, a CRAC or a CRAH— is administered remotely under the maintenance contract, and nobody knows who logs in, from where, or with which credential. This article breaks down the six key questions for auditing that surface and the equipment and advisory map you must review in your plant.

The attack that documented the vector

The first wave was in France: nearly 700 establishments affected, temperatures of up to 50 °C and equipment that caught fire. France’s national cybersecurity agency, ANSSI, published the CERTFR-2026-ALE-012 alert on October 12 about mass compromises of Danfoss controllers, and one day later extended it to Copeland equipment and to the Dixell brand.

The second wave arrived on November 2: around 40 Delhaize stores in Belgium and Luxembourg, plus stores in Sweden, Ireland, the Netherlands, Estonia and Finland. At a Delhaize branch in Hoeilaart, in Flanders, 100.000 euros of product were lost, not counting the closure.

The detail that defines the vector lies in the industry’s reaction. Stephan Moelans, CEO of the Belgian manufacturer Sabcobel, stated that the units required “physical modifications, not just software updates”, and that the exit chosen by the market was to manage the refrigeration units with a secure network connection: many customers adopted that option after the October attack. The convenience of remote maintenance and the attack vector are the same decision.

The equipment that was left exposed and how the attackers got in

EquipmentVulnerabilityEffectFixSupport note
Danfoss AK-SM 8xxA (earlier than R4.2)CVE-2025-41450: password generated from the dateAuthentication bypassFirmware R4.2 or laterAK-SM 800 unsupported since May 2021
Danfoss AK-SM 8xxA (earlier than 4.3.1)CVE-2025-41451 and CVE-2025-41452: command injection in the alarm and email configurationRemote code execution after authenticationFirmware 4.3.1Fix published by the manufacturer
Copeland XWEB and XWEB Pro (300D, 500D and 500B PRO ≤ 1.12.1)22 CVEs (including CVE-2026-25085 and CVE-2026-21718)Authentication bypass, denial of service, memory corruption and code execution (CVSS v3 10)Update XWEB Pro from the manufacturer’s pageNo published end-of-support date

Apart from those three cases with a documented CVE, there is a fourth piece of equipment mentioned in the Cloud Security Alliance note: the Danfoss AK-SC 355, reported as withdrawn from the market in 2016 and present among the compromised systems. An unsupported controller that remains installed and is administered remotely is the worst possible case. The research that anticipated it dates from August 2026: Claroty published “Freeze the Controller, Defrost the Food”, with dozens of vulnerabilities in Danfoss AK-SM 800A and Copeland XWEB controllers, and located 2.765 AK-SM 800A units reachable from the internet. CISA had already published the Danfoss ICSA-25-140-03 (May 2025) and Copeland ICSA-26-057-10 advisories, with CVSS v3 of 10.

What makes the timeline useful is its ending: the insurer Coalition measured exposure between September 7 and October 6, 2026, months after the corrective firmware shipped. Its sensors detected 1.506 unique IP addresses still exposing a Danfoss StoreView administration panel open to the internet, 820 of them (54 %) on French networks; in total, at least 2.624 controllers from both brands had an accessible login page.

Why the scenario scales in your data center

The same devices that govern a supermarket’s refrigeration chambers regulate a chiller or a precision cooling unit: supervisory controllers that, according to Cloud Security Alliance, are typically administered by the maintenance contractor, remotely. What breaks first is not the equipment, it is the seven most common CRAC and CRAH failures that your operator already knows by heart. There is no public evidence that a data center has suffered such an attack, and it should be said plainly: this class of equipment is installed and, in many cases, has an open remote access channel.

The chain of damage does not end with the lost product. An unauthorized defrost command causes a temperature excursion in the room, thermal shutdown of the computing equipment and a breach of the SLA with your customer. And if the controller itself is compromised and not just its operating mode, the attacker gains a foothold in the operational technology network, alongside the building management system and the power chain.

The six questions your cooling plant must answer

All of the above comes down to six questions with a verifiable answer. Ask for them in writing, with the inventory attached.

  • How many supervisory controllers are in your plant and which ones are reachable from the internet? Request the inventory with address, type of exposure (public, private or demilitarized zone) and the person responsible for each unit.
  • Who administers remote access and by what mechanism? Require VPN with two-factor authentication or a local jump host, with access segmented from the computing network and the electrical network, and not only from the office network.
  • What firmware version does each controller run and which ones no longer receive updates because they are out of support? An AK-SM 800 unsupported since 2021 or an AK-SC 355 unsupported since 2016 are not patched: they are replaced, and that is a line item in the maintenance budget.
  • How is the credential for the controller’s web panel generated? If it depends on the date or on a default value, authentication bypass is open and no sophisticated attacker is needed.
  • Who can modify the configuration, including the alarm and the defrost cycles, and is there a record of that change? A change without a log is indistinguishable from sabotage until it has already happened.
  • Is there a rehearsed local operation and manual disconnection plan for when the controller is not trustworthy? The European manufacturer had to physically modify the units: that is the scenario you have to be prepared for.
  • The reference for structuring that audit is already published here: IEC 62443-3-3 vs IEC 62443-4-2, the two levels of OT cybersecurity a data center in Mexico needs. And the starting point is the panel your operator checks every morning: the daily operator checklist for precision cooling already tells you what has to be on screen. What is missing is who can write to that controller from outside.

    The angle in Mexico: there is no standard today, and that changes the argument

    As of the close of this edition, Mexico has no specific regulation requiring a private data center to audit the remote access surface of its cooling plant. What does exist is an initiative in the Senate: the Cybersecurity Law, introduced on April 30, 2025 with 64 articles. It creates the National Cybersecurity Agency and the Register of Critical Information Infrastructures, and classifies operators into three levels of criticality with differentiated obligations.

    For the high criticality level, Article 30 requires continuous risk assessment, annual cybersecurity audits, contingency and recovery plans, and immediate incident notification to the Agency. That the text is still in process is part of the story: a data center that delivers electrical, telecommunications and computing continuity is a natural candidate for that register, and the cooling plant audit will come included in the package when the conversation with the regulator starts.

    Two clarifications to avoid overselling the regulation: the famous 72-hour deadline is not in the articles, and the only 24-hour deadline runs from the Agency toward the three levels of government, not from the companies. In the meantime, the voluntary baseline is SP 800-82 Rev. 3 on operational technology security, with the IEC 62443 series.

    The clause missing from your maintenance contract

    The European manufacturer that suffered the attack gave the lesson in a single sentence: the units required physical modifications, not just software updates. From that follows a clause that today almost no remote maintenance contract includes: the inventory of remote accesses declared by the provider, with named users, two-factor authentication and session logging; the commitment to firmware support and the replacement schedule for out-of-support equipment; the right to disconnect the remote channel and operate the plant locally during an incident; and the agreement on who pays for the physical modification when the equipment can no longer be patched.

    This is the difference between a maintenance policy and an audit. The policy guarantees that someone shows up when something fails; the audit guarantees that you know who can get into your controller before a third party does.

    The Noxtel point: a server room was not defended with a firewall, and it is not defended today by blocking the port of a controller that someone else administers. We quote an audit of the remote access surface of your cooling plant: controller inventory, network exposure, firmware versions, credential scheme and the remote maintenance clause. We deliver it as a document you can demand from your provider.


    Sources

  • Claroty Team82. “Freeze the Controller, Defrost the Food” (research, August 9, 2026) — https://claroty.com/team82/research/freeze-the-controller-defrost-the-food-uncovering-vulnerabilities-in-danfoss-refrigeration-controllers
  • Cloud Security Alliance Labs. “Danfoss Controller Hijacking” (research note, October 2026) — https://labs.cloudsecurityalliance.org/wp-content/uploads/2026/10/CSA_research_note_danfoss_controller_french_retail_sabotage_20261013-csa-styled.pdf
  • The Register. “Researchers warned attackers could “defrost the food” months before French supermarkets got hit” (October 15, 2026) — https://www.theregister.com/security/2026/10/15/researchers-warned-attackers-could-defrost-the-food-months-before-french-supermarkets-got-hit/5303425
  • CERT-FR / ANSSI. CERTFR-2026-ALE-012 alert, Danfoss and Copeland systems (October 12, 2026) — https://cert.cyber.gouv.fr/alerte/CERTFR-2026-ALE-012/
  • Want to master this?

    Noxtel Academy →

    Also in Cooling and Control Systems

    ← Back to categories